Updated on March 15, 2023
There are a few ways to raise bike handlebars. One is to purchase an aftermarket handlebar riser, which will clamp onto your existing handlebars and raise them by a set amount – usually an inch or two. Another way is to tie a towel or T-shirt around the handlebars, winding it several times until the bar height is where you want it.
Finally, you can also try bending the brake levers (or shifters) up towards the handlebars to get a little extra height. Be very careful when doing this, as it can damage your equipment if done incorrectly. Experiment a bit and see what works best for you.
Raising your bike’s handlebars can be a simple and relatively inexpensive way to improve your riding experience.
Related Article: Why Does My Bike Chain Keep Falling Off
It can make it easier to reach the controls, and can also help you achieve a more comfortable riding position. Give it a try – you may be surprised at the difference it makes!
Handlebar Height Is Important
The handlebars on your bike should be at a height that is comfortable for you. If they’re too low or forward, it might cause back problems and joints to bother with extra pressure while cycling;
however if there’s not enough room between the seat post(s) and saddle then this can also make riding difficult because of cramped hands – some people choose bars lower than where one would normally put them when sitting up straight (like 4-5 cm).
The important thing is to experiment and find what height works best for you. You can always adjust them as needed, so don’t be afraid to play around until you find the perfect position.
Related Article: What Is a Fender on a Bike
How high should handlebars be on bike?
It depends on the type of bike, your height, and your preference.
For mountain bikes, many people prefer to have the handlebars higher than the seat so that they can more easily ride on rough terrain.
For road bikes, most people prefer to have the handlebars at the same height as the seat or slightly lower so that they can more easily pedal. It really depends on what feels most comfortable for you.
Do handlebar risers affect handling?
Handlebars are designed to maintain the overall design of your bike in place while you ride. So when it comes down handling, bar risers will not have much impact since their position directly influences mass distribution and therefore balance but we don’t think this would matter on an off-road vehicle with rugged terrain where traction often decides success or failure.
What are the types of handlebar risers?
1. Clamp-on handlebar risers: As the name suggests, clamp-on risers attach to your existing handlebars and raise them by a set amount – usually an inch or two. These are easy to install and remove, and are a good option if you’re not sure how much of a rise you need.
2. Tie-on handlebar risers: These risers are simply loops that you tie onto your handlebars. They’re not as secure as clamp-on risers, but they’re much cheaper and can be easily adjusted to give you the perfect amount of rise.
3. Brake lever/shifter risers: You can also try bending the brake levers (or shifters) up towards the handlebars to get a little extra height. Be very careful when doing this, as it can damage your equipment if done incorrectly. Experiment a bit and see what works best for you.
Related Article: Is It worth Having Gold Bike Chain
Should I raise my handlebars?
It is important to keep your handlebars high enough so that you can ride upright. If they’re not at least as tall or higher than the seat, then it will push down on top of yourself and place unnecessary stress onto all areas in our bodies associated with sitting up straight: wrists, arms neck back!.
A good way to determine whether your handlebars are at a good height is by sitting on the bike and placing our hands on the grips. If we can do this without having to reach too far forward or arching our back, then the handlebars are probably in a good position.
If you’re still not sure, ask a qualified bike mechanic to help you out. They should be able to give you some advice on what height is best for you and your bike.
In conclusion, handlebar height is an important factor to consider when riding a bike. It can affect your comfort, performance, and even your safety. Be sure to experiment with different heights until you find what works best for you. And if you’re ever in doubt, ask a qualified bike mechanic for help.
Austin Jacobs is a passionate cycling enthusiast who has over five years of experience in bike repair and maintenance. He is an avid mountain biker and loves tinkering with bikes for hours on end to make sure they are running at their optimum performance level. Leland’s blog, which focuses on bike repairs and tips to keep them in good running order, was created out of a desire to share his knowledge and help fellow cyclists stay safe while enjoying the outdoors. He covers topics such as preventive maintenance, troubleshooting common issues, basic tools and supplies needed for repairs, and more.